Omron FH series User Manual page 493

FZ5-1100 series Sensor Controller
Terminal type
STEP 0
DSA 1
DI 2
DI_LINE 11
FH-L series/FZ5-L series/FZ5-600 series Sensor Controller
Terminal type
STEP 0
DSA 1
DI 2
DI_LINE 11
IMPORTANT
• When the Multi-line Random Trigger mode is selected in the following series, usable signal type or assignment are differ
depending on the used number of Lines.
• FH-1000 series
• FH-3000 series
• FZ5-1100 series
For more details of Operation mode, refer to
• This command gets the terminal status of each line by specifying its port number.
When getting the terminal status of an unusable line, the response code will be OK and the response data will always be
0.
Verify the received data by changing the actual parallel terminal status.
(Example)
The following sample command gets the state of STEP1:
<Command>
C
P P C 0 1
R
<Response>
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
0 1
STEP0 STEP1 -
DSA0 DSA1 -
DI0 DI1 DI2
- - -
0 1
STEP0 - -
DSA0 - -
DI0 DI1 DI2
- - -
Multi-line Random Trigger Mode Signal Specifications (p.325).
Terminal number
2 3 4
- -
- -
DI3 DI4
- -
Terminal number
2 3 4
- -
- -
DI3 DI4
- -
5 6
- - -
- - -
DI5 DI6 DI7
- - -
5 6
- - -
- - -
DI5 DI6 DI7
- - -
Command Control
7
7
3
491