Omron FH series User Manual page 282

Registering the Items To Output
Set expressions for the data to output.
Up to 8 expressions from 0 to 7 can be set in each unit.
1
Click the [Data Output] icon (
2
In the Item Tab Area, click [Setting].
3
In the list, select the output data number for the expression to set.
The selected output data number is displayed under the list.
4
Click the [...] button next to the expression box and set the expression.
Specify the processing items, measurement results, and measurement data in the expression. You can
also perform arithmetic or function calculations on the measurement data before it is output.
For calculation settings, refer to section of Calculation in FH/FZ5 Processing Item Function Reference
Manual (Cat. No. Z341).
5
Click the [...] button for the [Comment] box and enter an explanation of the expression.
The comment you enter will be displayed in the detailed results on the Main Window.
For example, if you enter "Test" as the comment for expression 0, "Test" will be displayed in place of
"Expression 0" in the detailed results area on the Main Window.
6
Repeat steps 4 and 5 to set expressions for all of the required output data numbers.
280
Non-procedure Communications
) in the measurement unit list (flow).
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)