Output Format (Data Output)
1
Click the [Data Output] icon (
2
In the Item Tab Area, click [Output format].
3
In the Output Setting Area, select the communications method.
Set value [Factory default]
[RS-232C/RS-422]
Ethernet
4
Select the output format in [Format setting].
Set value [Factory default]
[ASCII]
Binary
282
Non-procedure Communications
) in the measurement unit list (flow).
Communications are performed via a RS-232C/RS-422 connection.
Communications are performed via the Ethernet.
Outputs ASCII text. Refer to
Series User's Manual (Cat. No. Z365).
Outputs binary data. Measurement values are multiplied by 1,000 and output is contin-
uous with 4 bytes per data item.
Description
Description
Character Code Table in the Vision System FH/FZ5
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)