Confirming the System Configuration
The FH/FZ5 are Vision Systems that perform measurement processing through a Sensor Controller on
measurement objects that are imaged by a Camera.
In a system configuration that is connected to a PLC, computer, or other external device, measurement
commands can be received from and measurement results can be output to the external device.
System Configuration
An overview of the FH/FZ5 series system configuration is given below.
External device (e.g, PLC)
The Sensor Controller is connected to an external device (PLC, etc.)
by a communication cable, and communication can be performed
using various communication protocols. Refer to
Connecting and Communicating with External Devices (p.43) for
information on the different communications protocols.
Communications protocol
Parallel
PLC Link
EtherNet/IP
EtherCAT (FH-1000 series/
FH-3000 series only)
Non-procedure
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Methods for
Communications cable
Parallel I/O cable
Ethernet cable
RS-232C cable
Ethernet cable
Ethernet cable
Ethernet cable
RS-232C cable
Sensor Controller
An LCD monitor (BOX type only) for operation
and monitoring and a camera are connected to
the Sensor Controller unit.
For details, refer to the
Vision System FH/FZ5
Series User's Manual (Cat. No. Z365) and the
Instruction Manual that is provided with each
individual device.
Confirming the System Configuration
Camera
13
1