Command List - Omron FH series User Manual
Hide thumbs
Also See for FH series:
- User manual (582 pages) ,
- Hardware manual (254 pages) ,
- Operation manual (166 pages)
Table of Contents
Advertisement
Command List
This section explains the input format for each command used for serial non-procedure (normal)
communications. Commands are input with ASCII text. Both lowercase and uppercase letters can be used. For
command details, refer to
Execution Commands
Command
BRUNCHSTART
CLRMEAS
CPYSCENE
DATASAVE
DELSCENE
ECHO
IMAGEFIT
IMAGESCROLL
IMAGEZOOM
MEASURE
MEASUREUNIT
MOVSCENE
REGIMAGE
RESET
TIMER
UPDATEMODEL
USERACCOUNT
Commands to Get Status
Command
DIPORTCOND
IMAGEDISPCOND IDC
292
Non-procedure Communications
Non-procedure Command Details (p.426).
Abbreviation
Branches to the start of the measurement flow (pro-
BFU
cessing unit 0).
Clears all of the measurement values of the current
None
scenes.
CSD
Copies the scene data.
Saves System + Scene group data in the Sensor Con-
None
troller's memory.
DSD
Deletes the scene data.
Returns an arbitrary string as it is to the external device,
EEC
which has sent the string.
Returns the display position and display magnification
EIF
to their default values.
Shifts the image display position by the specified
EIS
amount.
Zooms the image display in or out by the specified fac-
EIZ
tor.
Performs one measurement.
M
Starts continuous measurement.
Completes continuous measurement.
MTU
Executes a test measurement for the specified unit.
MSD
Moves the scene data.
Registers the specified image data as a registered
image.
RID
Loads the specified registered data as a measurement
image.
None
Restarts the Sensor Controller.
Executes the specified command string after a speci-
TMR
fied delay.
UMD
Re-registers the model data with the current image.
Adds a user account to a specified group ID.
UAD
Deletes a specified user account.
Abbreviation
DPC
Gets the ON/OFF status of all parallel DI terminals
Gets the image mode for the specified Image Display
Pane.
Function
Function
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Reference
Reference:
(p.429)
Reference:
(p.429)
Reference:
(p.430)
Reference:
(p.435)
Reference:
(p.438)
Reference:
(p.443)
Reference:
(p.450)
Reference:
(p.456)
Reference:
(p.462)
Reference:
(p.474)
Reference:
(p.474)
Reference:
(p.475)
Reference:
(p.476)
Reference:
(p.477)
Reference:
(p.495)
Reference:
(p.496)
Reference:
(p.511)
Reference:
(p.515)
Reference:
(p.517)
Reference
Reference:
(p.441)
Reference:
(p.448)
Advertisement
Table of Contents
Troubleshooting
