Omron FH series User Manual page 279

Connecting via RS-232C
Note
• Input signals cannot be handled during setting of communications specifications. However, the input status can be
checked with [Confirmation].
Reference: Testing Communications (p.285)
• Data output via serial communications is suspended while communications specifications are being set.
1
On the Main Window, select [Tool] − [System Settings].
2
From the tree view on the left, select [System Settings] and then select [Communication] −
[RS-232C/422 (Normal)] or [RS-232C/422 (Normal (Fxxx series method))].
The RS-232C window is displayed.
3
Set the following items.
Setting item
Interface
*2
Baud rate [bps]
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Set value
[Factory default]
• [RS-232C] Use the same communications specifications as the external
*1
• RS-422 device.
• 2400
• 4800
• 9600
Use the same communications specifications as the external
• 19200
device.
• [38400]
• 57600
• 115200
Description
Non-procedure Communications
2
277