Omron FH series User Manual page 196

Data Output Area (Sensor Controller to PLC)
Data that is output to the Data Output Area is not automatically assigned.
Each data item for output is assigned in an Output Unit.
First word in the
Data Output Area
15
+0
DATA0
+1
+2
DATA1
+3
+4
DATA2
+5
+6
DATA3
+7
+8
DATA4
+9
+10
DATA5
+11
+12
DATA6
+13
+14 DATA7
Signal
DATA0-7 Output data 0 to 7
*1: PLC Link allows up to 256 data items to be output at one time. Set the number of output data items for each Data Output
processing item. By changing the default value for the number of output data items in the Data Output processing item from
8 to the maximum of 256, you can output up to DATA255.
Data storage in the PLC I/O memory depends on the connected PLC.
Refer to Memory Display Image on PLC I/O in the Vision System FH/FZ5 Series User's Manual (Cat. No.
Z365).
194
Communicating with PLC Link
14 13 12 11 10
*1
Signal name
The data set in the output processing items is output. When there are
*1
multiple processing items, data is overwritten to this area while hand-
shaking is performed.
Bit
9 8 7 6 5 4
Function
Vision System FH/FZ5 Series User's Manual
Name
3 2 1 0
Output data 0
Output data 1
Output data 2
Output data 3
Output data 4
Output data 5
Output data 6
Output data 7
for Communications Settings (Z342)