Signal
Signal name
Flow Com-
XWAIT
mand Wait Bit
Output Items
Measurement Results for Which Output Is Possible (Fieldbus Data Output)
You can use the processing items that are related to outputting results to output the following data.
You can also access measured values from the Calculation or other processing units.
Measured item
Judgement
JG
Data 0 to 7
D00 to D07
External Reference Tables (Fieldbus Data Output)
By specifying a number, the following data can be referenced from control commands or processing items that
have a set/get unit data function.
Number
0
Judgement
5 to 12
Data 0 to Data 7
150
Output type
250
Communicating with EtherNet/IP
Function
This signal tells when
input of a command can
be acknowledged during
execution of fieldbus flow
control.
Text string
Judgement result
Results of expressions set for output data 0 to 7
Data name
Get only
Get only
Set/Get
OFF to ON
The signal is ON when a
command can be input
during execution of fieldbus
flow control.
Description
Set/Get
0: No judgement (unmeasured)
1: Judgement result OK
−1: Judgement result NG
• ASCII: −99999999.9999 to 999999999.9999
• Binary: −2147483.648 to 2147483.647
0: Fixed point
1: Floating point
Vision System FH/FZ5 Series User's Manual
ON/OFF timing
ON to OFF
The signal is OFF when a
command cannot be input
during execution of the field-
bus flow control.
Data range
for Communications Settings (Z342)