Omron FH series User Manual page 315

Set the items to output.
In an expression, set the data to output (i.e., the measured value of a processing item or the calculation
results of an expression).
Up to 8 expressions from 0 to 7 can be set in each unit.
1
Click the Parallel Data Output icon (
2
In the Item Tab Area, click [Setting].
3
In the list, select the output data number for the expression to set.
The selected output data number is displayed under the list.
4
Click the [...] button next to the expression box and set the expression.
Specify the processing items, measurement results, and measurement data in the expression.
You can also perform arithmetic or function calculations on the measurement data before it is output.
For calculation settings, refer to section of Calculation in FH/FZ5 Processing Item Function Reference
Manual (Cat. No. Z341).
5
Click the [...] button for the [Comment] box and enter an explanation of the expression.
The comment you enter will be displayed in the detailed results on the Main Window.
For example, if you enter "Test" as the comment for expression 0, "Test" will be displayed in place of
"Expression 0" in the detailed results area on the Main Window.
6
Repeat steps 4 and 5 to set expressions for all of the required output data numbers.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
).
Parallel Communications
2
313