Omron FH series User Manual page 115

Object Description Format
In this manual, objects are described in the following format.
Object description format
<Index> <Object name>
Range: <Setting range>
Size: <Size>
Object description format with sub-indexes
<Index> <Object name>
Sub-index 0
Range: <Setting range>
Size: <Size>
•
•
•
Sub-index N
Range: <Setting range>
Size: <Size>
The following values are indicated within the pointed brackets <>.
• Indexes : An object index given by a four-digit hexadecimal number
• Object name : The object name
• Range : The possible range of settings
• Unit : Physical unit
• Default : Default value set before product shipment
• Attribute : The timing when a change is updated in a writable object
A: Always enabled
B: Timing of count stop → operation (Encoder Input Slave Unit only)
C: Timing of pre-operational state → safe-operational state
D: Timing of pre-operational state → init state
R: Updated after the power supply is reset
-: Read only
• Size : The object size is given in bytes
• Access : Indicates whether the object is read only, or read and write
RO: Read only
RW: Read and write
• PDO map : Indicates the PDO mapping possibility
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Unit: <Unit> Default: <Default setting>
Access: <Access>
Unit: <Unit> Default: <Default setting>
Access: <Access>
Unit: <Unit> Default: <Default setting>
Access: <Access>
EtherCAT Connections (FH-1000 series/FH-3000 series only)
Attribute: <Data attribute>
PDO map: <Possible/Not possible>
Attribute: <Data attribute>
PDO map: <Possible/Not possible>
Attribute: <Data attribute>
PDO map: <Possible/Not possible>
2
113