Output Data Settings (Processing Item Registration) - Omron FH series User Manual

Output Data Settings (Processing Item Registration)

Set the items to output through PLC Link communications and the output format.
Note
When outputting characters read by a processing item such as Barcode, these settings are set in the processing item used
to read the characters (Character Inspection, Barcode, or 2DCode).
Refer to the descriptions for each processing item for details on the character output settings and output format.
• Character Inspection (Refer to
Manual (Cat. No. Z341).)
• Barcode (Refer to
Z341).)
• 2DCode (Refer to
Z341).)
• OCR (Refer to OCR in the Vision System FH/FZ5 Series Processing Items Reference Manual (Cat. No. Z341).)
Registering Processing Items
Register the processing items for data output in the measurement flow.
1
Click [Edit flow] in Toolbar.
2
Click [Data Output] in the processing item tree.
3
Click [Append].
The [Data Output] processing item is appended at the bottom of the unit list (flow).
184
Communicating with PLC Link
Character Inspection in the Vision System FH/FZ5 Series Processing Items Reference
Barcode in the Vision System FH/FZ5 Series Processing Items Reference Manual (Cat. No.
2DCode in the Vision System FH/FZ5 Series Processing Items Reference Manual (Cat. No.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)