Omron FH series User Manual page 470

LASTIMAGESAVE or LIS
Executes a save of the last input image. The character string handed over by the argument is used as the file
name.
<Command format>
or
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
File name
*1: Do not specify a save destination other than RAMDisk or External memory.
The saved Scene data area may be reduced and the Sensor Controller will not perform correctly.
(Example)
When saving the last input image to the file named "abc.ifz".
<Command>
<Response>
Note
• When the extension is "ifz", the image is saved with the specified file name.
• When the extension is anything other than "ifz", the image is saved with ".ifz" appended to the file name.
• If there is no extension (only the folder name is given), the image is saved to a file named time stamp ".ifz".
468
Command Control
The folder name to save image data.
Specify the folder name as an absolute path.
The save destination differs by Sensor Controller model.
Save destination FH series/FZ5-1100 series
RAMDisk C:\Data\RAMDisk
External memory E:\, F:\, G:\, H:\, M:\ (FH series only)
*1
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)