Omron FH series User Manual page 268

Service
Service code
14 (0E hex)
16 (10 hex)
Settings for Data Sent by the Sensor Controller
Instance
Setting item
Instance
Attribute
Attribute ID
0x03
0x04
Service
Service code
14 (0E hex)
ClassID:100 (64 hex) Vision Sensor Object
You can exchange character string data with a format equivalent to non-procedure commands with objects
specific to the Sensor Controller. You can use this object, for example, to output character strings, which is not
supported by tag data links.
Instance
Setting item Set value
1
Instance
2 to 8
266
Communicating with EtherNet/IP
GetAttributeSingle
SetAttributeSingle
Set value
101 For normal control and for line 0 in the Multi-line Random Trigger Mode
103 For line 1 in the Multi-line Random Trigger Mode
105 For line 2 in the Multi-line Random Trigger Mode
107 For line 3 in the Multi-line Random Trigger Mode
109 For line 4 in the Multi-line Random Trigger Mode
111 For line 5 in the Multi-line Random Trigger Mode
113 For line 6 in the Multi-line Random Trigger Mode
115 For line 7 in the Multi-line Random Trigger Mode
Access Name
Get Data
Get Size
GetAttributeSingle
For normal control and for line 0 in the Multi-line Random Trigger Mode
For lines 1 to 7 in the Multi-line Random Trigger Mode
Name
Gets the attribute value.
Sets a value for the attribute. Whether an attri-
bute can be set depends on the access attribute
of the attribute.
Description
Data type
This attribute contains the data that was sent by
the Sensor Controller.
The format is the same as for input connection
BYTE array
in tag data link communications.
Reference:
sor Controller Originator to PLC Target) (p.240)
UNIT Number of bytes: 48
Name
Gets the attribute value.
Description
Vision System FH/FZ5 Series User's Manual
Description
Description
Output Connection to PLC (Sen-
Description
for Communications Settings (Z342)