Non-Procedure Command Details - Omron FH series User Manual

Non-procedure Command Details

This section describes details of commands used in non-procedure communication.
ALLIMAGESAVE or AIS
Writes all the image data in the image buffer (specified with [main unit logging image]) to external memory in ifz
format.
<Command format>
A L L I M A G E S A V E
or
A I S
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Destination folder
name
*1: Do not specify a save destination other than RAMDisk or External memory.
The saved Scene data area may be reduced and the Sensor Controller will not perform correctly.
(Example)
When you save the data to "IMG01" folder of the external memory:
<Command>
\
<Response>
426
Command Control
C
R
Destination folder name (256 characters max.)
The folder name to save image data.
Specify the folder name as an absolute path.
The save destination to use differs by Sensor Controller model.
Save destination FH series/FZ5-1100 series
RAMDisk C:\Data\RAMDisk
External memory E:\, F:\, G:\, H:\, M:\ (FH series only)
\ \
C
R
Destination folder name (256 characters max.)
*1
\RAMDISK
\USBDisk to \USBDisk3
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
FZ5-L series/FZ5-600 series