Omron FH series User Manual page 26

Signal
RUN
Run Mode
ACK
SHTOUT
STGOUT
*1: This signal is linked to the Output Unit processing items in the measurement flow.
It is not associated with the BUSY signal. It is not related to the parallel interface OR signal. Note that the operation is different
when using PLC Link. See
*2: This signal is always OFF during display of a through image.
If you use a Camera with Lighting Controller, the time required for the READY or Trigger Ready signal to turn OFF may
increase in comparison with not using a Camera with a Lighting Controller.
For details, refer to
Items Reference Manual (Cat. No. Z341).
*3: The OR signal is output only when the [Output] option is selected in the Adjustment Window.
24
Control Methods Using an External Device
Signal name
Measurement Mode Signal
Command Completion Flag
Exposure Completion Signal
Strobe Trigger Output
Communicating with PLC Link (p.162).
Camera Image Input FH or Camera Image Input HDR in the Vision System FH/FZ5 Series Processing
Function
This is a notification signal indicating the FH/FZ5 Sensor
Controller is in Run mode (In a measurement capable state
with [RUN signal output] checked in the Layout settings for
the currently displayed line).
This signal tells when execution of the DI command has
been completed.
This signal tells when Camera exposure has been
completed.
This is the trigger signal for the strobe.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)