Omron FH series User Manual page 101

Checking Sysmac Error Status
You can use the troubleshooting functions of the Sysmac Studio Standard Version to check the Sysmac error
status. Refer to the NJ-series Troubleshooting Manual (Cat. No. W503) for information on troubleshooting
functions.
1
Select [Troubleshooting] from the Tools Menu while online. You can also click the
[Troubleshooting] button in the toolbar.
The Troubleshooting Dialog Box is displayed.
2
Click the [Controller Errors] tab.
A list of the current Sysmac error status and corresponding event codes will be displayed.
Clearing the Sysmac Error Status
1
Remove the cause of the error and then click the [Reset All] button on the [Controller Errors]
tab page of the [Troubleshooting] pane.
Note
Even if you reset the Sysmac error status, the error log will remain in the logs on the [Controller Event Log] tab.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
EtherCAT Connections (FH-1000 series/FH-3000 series only)
2
99