Omron FH series User Manual page 430

BKDSAVE
The system + scene group 0 data currently being used by the Sensor Controller is saved to a file.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Destination folder
name
*1: Do not specify a save destination other than RAMDisk or External memory, i.e. C:\ProgramFiles\FZ
The saved Scene data area may be reduced and the Sensor Controller will not perform correctly.
IMPORTANT
• Do not turn off power to the Sensor Controller until there is a response.
(Example)
When you save the following case to the Sensor Controller:
• Data: The current System + Scene group 0
• Drive name: USBDisk2
• Folder name of the external memory: IMG01
• File name: LABEL1.BKD
<Command>
S A V E
<Response>
428
Command Control
The name of the file containing the System data and Scene group 0 data you wish to save.
Specify the folder name as an absolute path.
The file name needs the "BKD" extension.
The save destination to use differs by Sensor Controller model.
Save destination FH series/FZ5-1100 series
RAMDisk C:\Data\RAMDisk
External memory E:\, F:\, G:\, H:\, M:\ (FH series only)
\ \ \
*1
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)