Omron FH series User Manual page 429

BKDLOAD
Reads system + scene group 0 data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
The name of the file containing the System data and Scene group 0 data you wish to load.
Specify the file name as an absolute path.
The file name needs the "BKD" extension.
The file which has "BKD" extension can be load.
Destination folder
The load destination to use differs by Sensor Controller model.
name
Load destination
RAMDisk
External memory
IMPORTANT
• Do not turn off power to the Sensor Controller until there is a response.
(Example)
When you load the following case from the Sensor Controller:
• Drive name: USBDisk2
• Folder name of the external memory: IMG01
• File name: LABEL1.BKD
<Command>
\
<Response>
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
FH series/FZ5-1100 series
C:\Data\RAMDisk
E:\, F:\, G:\, H:\, M:\ (FH series only)
\
\
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
Command Control
3
427