Omron FH series User Manual page 241

Signal
EXE Command Execution Bit
DSA Data Output Request Bit
STEP Measure Bit
XEXE Flow Command Request Bit
ERCLR Error Clear Bit
CMD-CODE Command code
CMD-PARAM Command parameters
User Input Area
User Input Area 0 to 5
0 to 5
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Signal name Function
Executes a command.
Reference: Command List (p.251)
Requests the next data output.
Reference: Output Data Settings (Processing Item Registra-
tion) (p.232)
Executes a measurement.
Executes a command during execution of fieldbus flow control.
Clears the ERR signal from the Sensor Controller.
Stores the command code.
Stores command parameters.
User can write the defined data to the Sensor Controller using
Macro customize function.
• Data type of User Input Area 0 to 3 is DINT.
Data type of User Input Area 4 to 5 is LREAL.
Communicating with EtherNet/IP
2
239