Communications Specifications Settings - Omron FH series User Manual

Communications Specifications Settings

You must set the data output size, output handshaking, and output controls for EtherCAT communications.
IMPORTANT
• Use the same communications specifications settings for the Sensor Controller and the external device.
• Do not input signals to EtherCAT from an external device while setting the EtherCAT system settings.
• Before you set the communications specifications, set the Communications Module to EtherCAT.
Restart the system after you save the data to the Vision Sensor.
Reference: Communications Module Settings (Startup Settings) (p.62)
1
On the Main Window, select [Tool]− [System Settings].
2
Select [System Settings] and then select [Communications] − [EtherCAT].
The tab page for the communications settings is displayed.
3
Set up the following items.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
EtherCAT Connections (FH-1000 series/FH-3000 series only)
2
63