Omron FH series User Manual page 172

IMPORTANT
• If the operation mode is set to Multi-line Random-trigger Mode, set a different I/O port number for each line.
• Change the IP address and subnet mask for [Address setting] and [Address setting 2] as required so that each
designate a different network address. If the same network address is specified, communications may not be
performed correctly.
• Be sure to change the output IP address from its factory default value in accordance with your network
environment.
3
Click [PLC link].
The PLC Link Setting View is displayed.
4
Set the following items.
Some setting items will change depending on the selected Communications Module.
170
Communicating with PLC Link Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)