Omron FH series User Manual page 487

IMPORTANT
• When the Multi-line Random Trigger mode is selected in the following series, usable signal type or assignment are differ
depending on the used number of Lines.
• FH-1000 series
• FH-3000 series
• FZ5-1100 series
Sending commands to the port number which assigned each Lines, acquisition of desired terminal status can be enable.
For more details of Operation mode, refer to
• Regarding the common signal of all lines, you can acquire the terminal status regardless using Line number.
Confirm the changing of the acquired data by adjusting the actual parallel terminal status.
(Example)
The following sample command returns the state of enabled STEP0 and DSA1:
<Command>
<Response>
The response of 1001 (binary) is given as 9 (decimal).
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Multi-line Random Trigger Mode Signal Specifications (p.325).
3
485
Command Control