Setting date and time
Changes the date and time of the internal calendar timer in the Sensor Controller.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
Note
• <Hour: 2 digits>, <Minute: 2 digits>, and <Second: 2 digits> can be omitted during setting. Settings cannot be updated
when these are omitted, however, and the previous time will be kept unchanged.
Allowable omission patterns include "omitting <second> only", "omitting <minute> and <second>", and "omitting <hour>,
<minute>, and <second>". Patterns that cannot be used include "omitting <hour> only" and "omitting <minute> only".
(Example)
When changing the date and time to 8/30/2007, 12:30:00
<Command>
<Response>
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
3
437
Command Control