Sysmac Error Status - Omron FH series User Manual

Hide thumbs Also See for FH series:
Table of Contents

Advertisement

Sysmac Error Status

The Sysmac Studio Standard Version displays errors that occur in the EtherCAT system (including Sensor
errors) as Sysmac error status.
Sysmac Error Status Event Code Table
This section describes Sysmac error status event codes that are related to the sensor.
Refer to the
NJ-series Troubleshooting Manual (Cat. No. W503) for details on event codes.
Levels: Maj: Major fault level, Prt: Partial fault level, Min: Minor fault level, Obs: Observation, Info: Information
Event code
Event name
Fan/Power Sup-
08210000 hex
ply Error
Camera Overcur-
08220000 hex
rent Detected
Parallel I/O Over-
08230000 hex
current Detected
Setting Data
182D0000 hex
Load Error
Change in Con-
385A0000 hex
nected Camera
96
EtherCAT Connections (FH-1000 series/FH-3000 series only)
Meaning
• A foreign object is
interfering with fan
operation.
An error occurred in the
• A suitable power supply
fan or power supply.
voltage is not being used,
resulting in an
overvoltage or
undervoltage.
• There is a short circuit
An overcurrent flowed
inside the Camera cable
to the Camera.
or in a circuit inside the
Controller.
An overcurrent
• A parallel I/O interface
occurred in the parallel
line is short-circuited.
I/O interface.
• The data is corrupted
because the power
supply was turned OFF
while saving the previous
scene data.
Loading the scene
• As the result of changing
group data failed.
the operation mode, the
required amount of
memory increased,
resulting in insufficient
memory.
• The Camera connection
The Camera that is
information in the scene
connected is different
data does not agree with the
from when data was
connection information for
last saved.
the Camera connected to
the Controller.
Assumed cause
Maj Prt Min Obs Info
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
*1
Level
Reference
Reference:
(p.101)
Reference:
(p.101)
Reference:
(p.102)
Reference:
(p.102)
Reference:
(p.103)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fz5 series

Table of Contents