Omron FH series User Manual page 292

When a parameter is character string
The character string must be in double quotation marks.
Example: Save Scene with SCENESAVE command.
<Command Format>
SCNSAVE
0
Example: Set the prefix of Logging file name to be undefined with SYSDATA command.
<Command Format>
SYSDATA
Logging
OK Response in Non-procedure Communications (Fxxx series method)
The OK response for [Normal (Fxxx series method)] communications is compatible with the communications
method for F -series Vision Sensors.
The timing of the OK response when the Sensor Controller receives a MEASURE command with the [Normal
(Fxxx series method)] communications method (Refer to
(p.271)) is the same as the timing for an F
Non-procedure Communications
Command
MEASURE
Response
Measurement results
An OK response is returned when the
Controller receives the command.
With serial data output (when Ethernet output is set), up to 128 processing units can be registered. However, not
all data may be received depending on the network environment being used, computer performance, and the
software for receiving data.
290
Non-procedure Communications
"
C\Data\RAMDisk\ABC.SCN
imageLoggingHeader
Command
received.
OK
Measurement processed.
Measurement
completion
(Command Completion)
C
"
R
C
" "
R
Communications Module Settings (Startup Settings)
-series Vision Sensor.
Non-procedure Communications (Fxxx-series Method)
Command
MEASURE
Measurement results
Response
OK
An OK response is returned when
execution of the command is completed.
Vision System FH/FZ5 Series User's Manual
Command
acknowledged.
Measurement processed.
Measurement
completion (Command
Completion)
for Communications Settings (Z342)