MEASURE or M
Executing measurement
Executes measurement one time.
<Command format>
<Response format>
When processing is performed normally
Non-procedure
When processing is not performed normally
Note
• About "Normal (Fxxx series method)"
Reference:
Command Formats (p.289)
<Parameters explanation>
Measurement result
Starts continuous measurement
Starts continuous measurement.
<Command format>
<Response format>
When processing is performed normally
474
Command Control
When "Data Output" is set in the flow, the measurement results are output.
When "Data Output" is not set, the measurement results are not output.
Reference:
Output Format (p.296)
Normal (Fxxx series)
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)