Measurement Results That You Can Output With Fieldbus Data Output - Omron FH series User Manual

Signal
Signal
Name
Flow
Flow Com-
Command
mand Wait
Wait

Measurement Results That You Can Output with Fieldbus Data Output

You can use the processing items that are related to outputting results to output the following data.
You can also access measured values from the Calculation or other processing units.
Measured items
Judgement
DINT data 0 to 63
LREAL data 0 to 31
External Reference Table for Fieldbus Data Output
By specifying a number, the following data can be referenced from control commands or processing items that
have a set/get unit data function.
Number
0
1000+10*N(N=0...63) DINT data 0 to data 63
2000+10*N(N=0...31) LREAL data 0 to data 31
*1: Since the response data area is DINT type, the data is acquired as an integer type and a thousand value of the following range
-2147483.648 to 2147483.647
80
EtherCAT Connections (FH-1000 series/FH-3000 series only)
Function
This signal tells when input of a
command can be acknowl-
edged during execution of the
fieldbus flow control.
Text string
JG Judgement result
• Results of expressions that are set for output data 0 to 63 in DINT (4-
DI00 to DI63
• Outputs the value in the below by 1000 times as an integer type.
• Results of expressions that are set for output data 0 to 31 in LREAL
DL00 to DL31
• Outputs the values in the follows range as a Floating point.
Data name
Judgement
OFF to ON
This signal is ON when a com-
mand can be input during exe-
cution of the fieldbus flow
control.
Description
byte) format
-2147483.648 to 2147483.647
(8-byte) format
-999999999.9999 to 999999999.9999
Set/Get
0: No judgement (unmeasured)
Get only 1: Judgement result OK
−1: Judgement result NG
−99999999.9999 to 999999999.9999
Get only
−99999999.9999 to 999999999.9999
Get only
Vision System FH/FZ5 Series User's Manual
ON/OFF timing
ON to OFF
Switched from ON to OFF
when the Flow Command
Request signal switches from
ON to OFF when executing
Fieldbus flow control.
Data range
for Communications Settings (Z342)
*1
*1