Omron FH series User Manual page 402

Hide thumbs Also See for FH series:

Table of Contents

FZ5-L/FZ5-600 series Sensor Controller

• When the Multi-line Random Trigger mode is selected in the following series, usable signal type or assignment are differ

depending on the used number of Lines.

• FH-1000 series

• FH-3000 series

• FZ5-1100 series

For more details of Operation mode, refer to

• Sending the commands to the port number assigned to each Lines, the terminal status of each lines can be require.

When required the unusable terminal status, response cord is OK and the response data is discarded.

Make sure to check the acquired data by actually changing the parallel terminal status.

Command Control

Multi-line Random Trigger Mode Signal Specifications (p.325).

Vision System FH/FZ5 Series User's Manual

for Communications Settings (Z342)

Troubleshooting