Omron FH series User Manual page 319

Output Parameters (Parallel Judgement Output)
1
Click the [Parallel Judgement Output] icon (
2
Click [Output parameter] in the Item Tab Area.
3
Set the items in the output settings area.
Setting item
• [System (parallel)]
Output polarity
• Unit
• ON at NG
Output polarity
• ON at OK
4
For [Reflect to overall judgement], select whether to apply this processing unit's evaluation
result to the overall evaluation of the scene.
Setting value
[Factory default]
• [ON]
• OFF
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Setting value
[Factory default]
Select whether to match the output polarity of the evaluation result to the
system setting.
Selecting [Unit] lets you set the output polarity of the evaluation result
separately for each processing unit.
This setting is enabled when [Unit] is checked for [Output polarity].
Enables choosing whether the judgment results of this processing unit is reflected in the
scene overall judgment.
) in the measurement unit list (flow).
Description
Description
Parallel Communications
2
317