Output Data Settings (Processing Item Registration) - Omron FH series User Manual

Output Data Settings (Processing Item Registration)

Use the following procedures to set the items to output and the output format for the non-procedure protocol.
Note
When outputting characters read by a processing item such as Barcode, these settings are set in the processing item used
to read the characters (Character Inspection, Barcode, or 2DCode).
Refer to the descriptions for each processing item for details on the character output settings and output format.
• Reference: Character Inspection in the Vision System FH/FZ5 Series Processing Item Function Reference Manual
(Cat. No. Z341)
• Reference: Barcode in the Vision System FH/FZ5 Series Processing Item Function Reference Manual (Cat. No.
Z341)
• Reference: 2DCode in the Vision System FH/FZ5 Series Processing Item Function Reference Manual (Cat. No.
Z341)
Registering Processing Items
Register the processing items for data output in the measurement flow.
1
Click [Edit flow] in Toolbar.
2
Click [Data Output] in the processing item tree.
3
Click [Append].
The [Data Output] processing item is appended at the bottom of the unit list (flow).
4
Click the [Data Output] icon (
Refer to the following reference for details on the settings.
Reference: Registering the Items To Output (p.280)
Note
• Data is output in the order that data output is registered in the measurement flow, i.e., the timing is different for each data
output processing item. (Data output is executed in the order that it is executed in the measurement flow.) Reference:
Outputting the Output Data (p.27)
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
) and set the data output items and data format.
Non-procedure Communications
2
279