• Remote Operation over a Network (Refer to
System FH/FZ5 Series User's Manual (Cat. No. Z365).)
If more than one Sensor Controller is connected via Ethernet, a computer (the FH/FZ5 Tool) connected to the same
Ethernet network can be used to operate and monitor all the Sensor Controllers at once.
Computer (FH/FZ5 software)
Ethernet
Sensor
Sensor
Controller
Controller
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Remotely Operating the Controller (Remote Operation) in the Vision
Operate/monitor
Hub
Sensor
Controller
Communicating with an External Device
1
21