Denial Of Service - Dell Networking 2024 Reference Manual

Command
delete
delete backup-image
delete backup-config
delete startup-config
dir
erase
filedescr
rename
show backup-config
show bootvar
show running-config
show startup-config
write
a. For the meaning of each Mode abbreviation, see

Denial of Service

Command
dos-control firstfrag
dos-control icmp
dos-control l4port
dos-control sipdip
dos-control tcpflag
Description
Deletes a file from a flash memory.
Deletes a file from a flash memory device.
Deletes the backup configuration file.
Deletes the startup configuration file.
Prints the contents of the flash file system.
Erases the startup configuration, the backup
configuration, or the backup image.
Adds a description to a file.
Renames the file present in flash.
Displays contents of a backup configuration
file.
Displays the active system image file that the
switch loads at startup.
Displays the contents of the currently running
configuration file.
Displays the startup configuration file contents. PE
Copies the running configuration image to the
startup configuration.
Description
Enables Minimum TCP Header Size Denial of
Service protection.
Enables Maximum ICMP Packet Size Denial of
Service protections.
Enables L4 Port Denial of Service protection.
Enables Source IP Address = Destination IP
Address (SIP=DIP) Denial of Service protection.
Enables TCP Flag Denial of Service protections.
Mode Types on page 87.
Command Groups
a
Mode
PE
PE
PE
PE
PE
PE
PE
PE
PE
UE
PE
PE
a
Mode
GC
GC
GC
GC
GC
161