Green Ethernet - Dell Networking 2024 Reference Manual

Green Ethernet

Command
green-mode energy-detect
green-mode eee
clear green-mode statistics
green-mode eee-lpi-history
show green-mode interface-
id
show green-mode
show green-mode eee-lpi-
history interface
a. For the meaning of each Mode abbreviation, see
GVRP
Command
clear gvrp statistics
Description
Enables a Dell proprietary mode of power
reduction on ports that are not connected to
another interface.
Enables EEE low power idle mode on an
interface or all the interfaces.
Clears:
• The EEE LPI event count, and LPI duration
• The EEE LPI history table entries
• The Cumulative Power savings estimates
for a specified interface or for all the interfaces
based upon the argument.
Configures the Global EEE LPI history
collection interval and buffer size. This value is
applied globally on all interfaces on the stack.
Displays the green-mode configuration and
operational status of the port. This command is
also used to display the per port configuration
and operational status of the green-mode. The
status is shown only for the modes supported on
the corresponding hardware platform whether
enabled or disabled.
Displays the green-mode configuration for the
whole system. The status is shown only for the
modes supported on the corresponding
hardware platform whether enabled or disabled.
Displays the interface green-mode EEE LPI
history.
Mode Types
Description
Clears all the GVRP statistics information.
on page 87.
Command Groups
a
Mode
IC
IC
PE
GC
PE
PE
PE
a
Mode
PE
101