Table of Contents
Advertisement
Reboot
Press and hold the reset button for more than 3s
Reset to Factory
Press and hold the reset button for more than 10s
Default
3. Operation Guide
3.1 Button Mode
LEO-S595-WBG0 provides 3 kinds of pressing actions allowing users to define different alarms.
Please refer to chapter 5.1 for detailed message of every action.
Mode
Mode 1
Mode 2
Mode 3
3.2 NFC Configuration
LEO-S595-WBG0 can be configured via NFC-enabled smartphone.
1. Pull out the battery insulating sheet to power on the device. The indicator will light up in green for 3
seconds when device turns on.
2. Download and install "Advantech ToolBox" from Advantech website..
3. Enable NFC on the smartphone and open Advantech ToolBox.
4. Attach the smartphone with NFC area to the device to read device information.
5. Basic information and settings of devices will be shown on ToolBox if it's recognized
successfully. You can read and configure the device by tapping the Read/Write button on the
App. In order to protect the security of devices, password validation is required when first
www.advantech.com
Action
Short press the button (≤3 seconds).
Long press the button (>3 seconds).
Double press the button (press interval is within 3
seconds).
Slowly blinks
Quickly blinks
6 6
Advertisement
Table of Contents
