Dhcp Auto Provision; Ipv6 Settings; Figure 4.11 System > Dhcp Auto Provision; Figure 4.12 System > Ipv6 Settings - Advantech EKI-7710E-2C User Manual

4.4.3

DHCP Auto Provision

The DHCP Auto Provision feature allows you to load configurations using a server
with DHCP options. Through the remote connection, the switch obtains information
from a configuration file available through the TFTP server.
To access this page, click System > DHCP Auto Provision.
The following table describes the items in the previous figure.
Item
Status
Apply
The ensuing table for DHCP Auto Provision Information settings are informational
only: Status.
4.4.4

IPv6 Settings

To access this page, click System > IPv6 Settings.
The following table describes the items in the previous figure.
Item
Auto Configuration
IPv6 Address
Gateway
DHCPv6 Client
Apply
The ensuing table for IPv6 Information settings are informational only: Auto Config-
uration, IPv6 In Use Address, IPv6 In Use Router, IPv6 Static Address, IPv6 Static
Router and DHCPv6 Client.
Figure 4.11 System > DHCP Auto Provision
Description
Select the radio button to enable or disable the DHCP Auto Provision-
ing Setting.
Click Apply to save the values and update the screen.
Figure 4.12 System > IPv6 Settings
Description
Select the radio button to enable or disable the IPv6.
Enter the IPv6 address for the system.
Enter the gateway address for the system.
Enter the DHCPv6 address for the system.
Click Apply to save the values and update the screen.
42 EKI-7710 Series User Manual