Spanning Tree; Figure 4.39 L2 Switching > Spanning Tree > Stp Global Settings - Advantech EKI-7708 Series User Manual

4.5.10

Spanning Tree

The Spanning Tree Protocol (STP) is a network protocol to ensure loop-free topology
for any bridged Ethernet local area network.
4.5.10.1 STP Global Settings
The STP Global Settings page allows you to set the STP status, select the
configuration for a BPDU packet, choose the path overhead, force version and set
the configuration revision range.
To access this page, click L2 Switching > Spanning Tree > STP Global Settings.
Figure 4.39 L2 Switching > Spanning Tree > STP Global Settings
The following table describes the items in the previous figure.
Item
Enabled
BPDU Forward
PathCost Method
Force Version
Apply
The ensuing table for STP Information settings are informational only: STP, BPDU
Forward, PathCost Method and Force Version.
EKI-7708 Series User Manual
Description
Click the radio-button to enable or disable the STP status.
Select flooding or filtering to designate the type of BPDU packet.
Select short or long to define the method of used for path cost
calculations.
Click the drop-down menu to select the operating mode for STP.

STP-Compatible: 802.1D STP operation.

RSTP-Operation: 802.1w operation.

MSTP-Operation: 802.1s operation.
Click Apply to save the values and update the screen.
63