Fuel Pump Assembly / Fuel Level Gauge Removal And Installation - Suzuki GSF650A Service Manual

Fuel Pump Assembly / Fuel Level Gauge
Removal and Installation
Removal
WARNING
!
• Spilled gasoline should be wiped off
immediately.
• Keep away from fire or spark.
• Work in a well-ventilated area.
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation (Page 1G-9)".
2) Remove the fuel pump mounting bolts diagonally.
3) Remove the fuel pump assembly (1) and disconnect
the fuel level gauge lead wire coupler (2).
1
B817H21706012
I717H1170008-02
2
I718H1170025-02
4) Remove the fuel level gauge (3) while pushing the
pawl end "A".
CAUTION
!
Do not pull the lead wire when removing the
fuel gauge.
"A"
Installation
Install the fuel pump assembly in the reverse order of
removal. Pay attention the following points:
• Install the fuel level gauge (1) into the fuel tank.
NOTE
Push the lock position "A" fully until the
clicking sound heard.
1
Fuel System: 1G-11
3
I718H1170026-02
"A"
I718H1170024-02