Toshiba e-STUDIO 2555C Service Manual page 1295

Sub
05/08 Mode Element
element
08 Setting Printer Paper Pausing of pushing
mode feeding paper
08 Setting Printer Developm Waste toner mixing
mode ent paddles setting
08 Setting Printer Developm Waste toner mixing
mode ent paddles setting
08 Setting Printer Paper Color registration
mode transport control
08 Setting Printer Paper Paper size setting
mode feeding
08 Setting Printer Paper Paper size setting
mode feeding
Item Subitem Code
4553
During warming-up 4554
During warming-up 4554
4562
4567
4568
Sub- Default Acceptable
Details
code value value
3 PFP lower drawer 1 0-7
0 At normal status 1 0-5
1 During warming-up 2 0-5
after used toner full
status detection
Time of pausing 5 1-60
continuous printing
SRA3 450/320 148-
460/105-
320
460 mm x 320 mm 460/320 148-
460/105-
320
58
RAM Contents
M 0: Disabled
1: Enabled (recycled paper only)
2: Enabled (plain paper only)
3: Enabled (plain paper and recycled paper)
4: Enabled (thin paper only)
5: Enabled (recycled paper and thin paper)
6: Enabled (plain paper and thin paper)
7: Enabled (plain paper, recycled paper, and thin paper)
M 0: Agitated for 2 sec.
1: Agitated for 3 sec.
2: Agitated for 5 sec.
3: Agitated for 8 sec.
4: Agitated for 10 sec.
5: Agitated for 20 sec.
M 0: Agitated for 3 sec.
1: Agitated for 5 sec.
2: Agitated for 8 sec.
3: Agitated for 10 sec.
4: Agitated for 15 sec.
5: Agitated for 20 sec.
M Sets the time from reaching the start-up for color
registration control to pausing the printing. (Unit:
minute)
M Value of feeding/widthwise direction
M Value of feeding/widthwise direction
Proce Servic
dure e UI
4
4
4
1 Yes
10
10