Toshiba e-STUDIO 2555C Service Manual page 1293

Sub
05/08 Mode Element
element
08 Setting Printer Paper Color registration
Mode transport control
08 Setting Printer Finisher
mode
08 Setting Printer Finisher
mode
08 Setting Printer Paper Color registration
Mode transport control
08 Setting Printer Paper Color registration
Mode transport control
Item Subitem Code
4546
4547
4548
Start-up time set for 4550
color registration
Start-up time set for 4550
color registration
Sub- Default Acceptable
Details
code value value
Execution mode 4 0-6
setting
Manual stapling time- 15 0-30
out period
Finisher model 1 0-1
switching setting
value
0 1st startup 3 3-255
1 2nd or subsequent 30 3-255
startups
56
RAM Contents
M 0: Not performed automatically
1: (a)
2: (b)
3: (a)＋(b)＋(1)
4: (a)＋(b)＋(2)
5: (a)＋(b)＋(3)
6: (a)＋(b)＋(4)
<Description>
(a) Performs the adjustment automatically after unit
replacement, at pre-warming, and at recovery from the
sleep mode.
(b) Performs the adjustment automatically every time
after a specified period of time has passed.
(1) Never performs the adjustment at warming up and
after the first print job has completed.
(2) Performs the adjustment automatically after the first
print job has completed.
(3) If the adjustment was performed last time the
specified period of time has passed, (4) is applied. If
not, (2) is applied.
(4) Performs the adjustment automatically at warming
up.
M 3-30sec.
(In increments of 1sec.)
M 0: -
1: MJ-1036/1107/1108
M 1st color registration control start-up time [unit: minute]
automatically set when the color registration control has
not been performed automatically at power ON,
recovery from the ready status or recovery from the
sleep mode.
M Start-up time [unit: minute] for 2nd or subsequent color
registration control start-ups automatically set when the
color registration control has been automatically
performed after a specified period of time.
Proce Servic
dure e UI
1 Yes
1
1
4 Yes
4 Yes