Toshiba e-STUDIO 2555C Service Manual page 1258

Sub
05/08 Mode Element
element
08 Setting Process LED Factor setting for LED
Mode sub-line emission time
08 Setting Process LED Factor setting for LED
Mode sub-line emission time
08 Setting Process LED Factor setting for LED
Mode sub-line emission time
08 Setting Process LED Factor setting for LED
Mode sub-line emission time
08 Setting Process LED Factor setting for LED
Mode sub-line emission time
08 Setting Process LED Factor setting for LED
Mode sub-line emission time
Item Subitem Code
Multiple values 2620
Multiple values 2620
Binary 2621
Binary 2621
Binary 2621
Binary 2621
Sub- Default Acceptable
Details
code value value
6 Decelerating C 15 8-36
7 Decelerating K 15 8-36
0 Normal speed Y 15 8-36
1 Normal speed M 15 8-36
2 Normal speed C 15 8-36
3 Normal speed K 15 8-36
21
RAM Contents
M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value.
M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value.
M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value.
M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value.
M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value.
M Use this code to change the reproducibility of the
isolated points and thickness of fine lines in the image.
The larger the value, the sharper the isolated points
become and the sharper and thicker the fine lines
become. Be sure to perform image quality control after
changing the value.
Proce Servic
dure e UI
4
4
4
4
4
4