Toshiba e-STUDIO 2555C Service Manual page 1263

Sub
05/08 Mode Element
element
08 Setting Scanner
Mode
08 Setting System User Card reading device
Mode interface
08 Setting System User Card reading device
Mode interface
Item Subitem Code
3080
3500
3501
Sub- Default Acceptable
Details
code value value
Detection method of 1 1, 3
original size
Device setting 0 0-
429496729
Card reader format 0 0-
information -1 429496729
26
RAM Contents
SYS 1: Two-stage detection (lights twice)
3: Single-stage detection (lights once)
When "3" is set, the detection accuracy of dark originals
may decrease.
SYS To enable the e-Bridge ID Gate, a card reading device
should be set in the order of "ABYYZZZZ". (Enter the
5 corresponding values to "A", "B", "YY" and "ZZZZ".)
- AB: Special setting
- A: Debugging NIC
0: Not used 1: Used
- B: Interface
0: USB connection 1: Serial connection (KP-2003
only)
- YY: Authentication
00: No authentication using card
03: Mifare (KP-2005 only)
04: HID (KP-2004 only)
09: Magnetic card I/F
- ZZZZ: Sub-code (Specifies the usage type of card ID)
0000: No authentication using card
0001: IDm (Felica/NFC-Felica) and (or) UID
(Mifare/NFC-Mifare)
0002: Data (Felica/NFC-Felica/Mifare/NFC-Mifare)
0003: SSFC mode
SYS To access the data in the noncontact IC card, the Key
Information "LLLL" and the Sector Number "MMMM"
5 should be set. The "LLLL" should be set first, and then
"MMMM".
<KP-2005>
LLLL: Key information
MMMM: Sector number (hexadecimal number)
Proce Servic
dure e UI
1
5 Yes
5 Yes