Toshiba e-STUDIO 2555C Service Manual page 1283

Sub
05/08 Mode Element
element
08 Setting System Network
mode
08 Setting Counter Extra long Count switching
Mode size paper setting
count
08 Setting Counter Extra long Count switching
Mode size paper setting
count
08 Setting System General USB media direct
mode printing
08 Setting System General USB media direct
mode printing
08 Setting System Scanner
mode
Item Subitem Code
3793
3800
3800
3802
3803
3805
Sub- Default Acceptable
Details
code value value
LLTD function setting 1 1-2
0 461-800 mm 2 1-30
1 801-1200 mm 3 1-30
Paper size NAD: 2 0-13
Others:
6
Enable/disable setting 1 0-1
Department 3 0-3
Management setting
by Remote Scan
46
RAM Contents
NIC Sets the LLTD function.
1: Enabled
2: Disabled
SYS Sets the number of multiples. A sheet is counted as N
sheets when extra long size paper is used for printing.
SYS Sets the number of multiples. A sheet is counted as N
sheets when extra long size paper is used for printing.
SYS 0: ledger 1: legal 2: letter 3: computer 4: statement
5: A3 6: A4 7: A5 9: B4 10: B5 11: Folio 12:
Legal13" 13: LetterSquare
SYS Sets the USB media direct printing function.
0: Disabled 1: Enabled
* This code is not supported by LL20/25ppm model.
SYS Sets the department management with remote scanning
as follows:
0: w/o GUI OFF, w/ GUI OFF
1: w/o GUI ON, w/ GUI OFF
2: w/o GUI OFF, w/ GUI ON
3: w/o GUI ON, w/ GUI ON
w/o GUI:
Remote scanning is operated on SSOP application of
eCOPY Inc.
w/ GUI:
Remote scanning is operated on TTEC-specific GUI.
This setting is only for department management with
remote scanning. When GUI is set ON, a department
code dialog is displayed at the start-up of remote
scanning. This code is valid only when the code 08-
9120 is set "1 (Valid)".
Proce Servic
dure e UI
12
4 Yes
4 Yes
1
1
1