Toshiba e-STUDIO 2555C Service Manual page 1288

Sub
05/08 Mode Element
element
08 Setting Printer Laser
mode
08 Setting Printer Laser
mode
08 Setting Printer Paper Automatic change of
Mode feeding paper source
08 Setting Printer Paper Automatic change of
Mode feeding paper source
08 Setting Printer Paper Feeding retry number
Mode feeding setting
08 Setting Printer Paper Feeding retry number
Mode feeding setting
08 Setting Printer Paper Feeding retry number
Mode feeding setting
08 Setting Printer Paper Feeding retry number
Mode feeding setting
Item Subitem Code
4012
4015
When a drawer is 4016
specified
When a drawer is 4016
specified
1st drawer 4020
1st drawer 4020
2nd drawer 4021
2nd drawer 4021
Sub- Default Acceptable
Details
code value value
Pre-running of print 0 0-2
device
Time to shift to energy 3 0-6
saving of print device
0 PPC 0 0-1
1 Printing/BOX printing 0 0-1
0 Plain paper/recycled 5 0-5
paper/Thin paper
1 Other paper 5 0-5
0 Plain paper/recycled 5 0-5
paper/Thin paper
1 Other paper 5 0-5
51
RAM Contents
SYS Sets whether or not switching the status of print device
from the standby to the ready to print when the original
is set on the RADF or the platen cover is opened.
0: Valid (when using RADF and the original is set
manually)
1: Invalid
2: Valid (when using RADF only)
SYS Switches the status of print device from the ready for
print to the standby when a certain period of time has
passed from the pre-running. This code sets the period
to switch the status to the standby.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec.
5: 40 sec. 6: 45 sec.
This setting is effective when the value of 08-4012 is set
to "0" or "2."
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when printing/BOX printing.
0: Does not change the paper source automatically
1: Changes the paper source automatically
M Sets the number of times feeding retry occurs from the
1st drawer.
M Sets the number of times feeding retry occurs from the
1st drawer.
M Sets the number of times feeding retry occurs from the
2nd drawer.
M Sets the number of times feeding retry occurs from the
2nd drawer.
Proce Servic
dure e UI
1
1
4 Yes
4 Yes
4 Yes
4 Yes
4 Yes
4 Yes