Toshiba e-STUDIO 2555C Service Manual page 1262

Sub
05/08 Mode Element
element
08 Setting Process Developm Toner density ratio
mode ent manual offset control
08 Setting Process Developm Toner density ratio
mode ent manual offset control
08 Setting Scanner
Mode
08 Setting Scanner RADF
Mode
08 Setting Scanner
Mode
Item Subitem Code
C 2707
K 2707
3015
3021
3025
Sub- Default Acceptable
Details
code value value
2 C 0 0-8
3 K 0 0-8
Pre-scan setting 0 0-1
switchover
Set for switchback- 0 0-1
mixed size copy
Correction of carriage 2 0-2
position
25
RAM Contents
M 0: Disabled 1: +4bit 2: +7bit 3: +10bit 4: +14bit 5: -
4bit 6: -7bit 7: -10bit 8: -14bit
When setting the value of this code to other than "0",
set the value of 08-2506 (Enable/disable setting of toner
density correction control) to "0" (Disabled).
M 0: Disabled 1: +4bit 2: +7bit 3: +10bit 4: +14bit 5: -
4bit 6: -7bit 7: -10bit 8: -14bit
When setting the value of this code to other than "0",
set the value of 08-2506 (Enable/disable setting of toner
density correction control) to "0" (Disabled).
SYS 0: Not performing pre-scanning
1: Performing pre-scanning
SYS This setting is whether the original length is detected or
not by transporting without scanning in reverse when
A4-R/FOLIO paper or LT-R/LG paper is detected in a
mixed size copying.
0: Disabled -
AMS:
A series - Judges as A4-R without transporting in
reverse with no scanning.
LT series - Judges whether it is LT-R or LG by its length
without transporting in reverse with no scanning.
APS:
A series - Judges whether it is A4-R or FOLIO without
transporting in reverse with no scanning.
LT series - Judges whether it is LT-R or LG without
transporting in reverse with no scanning.
1: Enable 1
AMS:
A series - Judges whether it is A4-R or FOLIO by
Transporting without scanning in reverse to detect its
length.
LT series - Judges whether it is LT-R or LG by
transporting without scanning in reverse to detect its
length.
APS:
The same as that of APS in 0: Disabled.
SYS 0: No correction
1: Performs correction before scanning
2: Performs correction after scanning
Proce Servic
dure e UI
4
4
1 Yes
1 Yes
1