Figure 4-20: Diag - Analog I/O Configuration Menu - Teledyne T100 Instruction Manual

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
4.8.4.1. ANALOG OUTPUT SIGNAL TYPE AND RANGE SPAN SELECTION
DIAG
PREV
DIAG AIO
< SET
DIAG AIO
< SET SET>
DIAG AIO
DIAG AIO
These buttons set
the signal level
0.1V
and type for the
selected channel
DIAG AIO
0.1V
To select an output signal type (DC Voltage or current) and level for one output channel,
activate the ANALOG I/O CONFIGURATION MENU from the DIAG Menu (refer
to Figure 4-17), then press:
ANALOG I / O CONFIGURATION
NEXT
AOUTS CALIBRATED: NO
SET> CAL
CONC_OUT_1:5V,OVR,CAL
EDIT
CONC_OUT_1 RANGE: 5V
SET> EDIT
CONC_OUT_1 RANGE: 5V
1V 5V 10V CURR
CONC_OUT_1 RANGE: 10V
1V 5V 10V CURR
DIAG – Analog I/O Configuration Menu
Figure 4-20:
ENTR EXIT
EXIT
EXIT
EXIT
ENTR EXIT
ENTR EXIT
Operating Instructions
Press SET> to select the
analog output channel to be
configured. Press EDIT to
continue
Pressing ENTR records the new setting
and returns to the previous menu.
Pressing EXIT ignores the new setting and
returns to the previous menu.
107