Appendix A - Version Specific Software Documentation; Appendix A-2: Setup Variables For Serial I/O, Software Version G.4 - Teledyne T100 Instruction Manual

Teledyne ML - T100 UV Fluorescence SO2 Analyzer

APPENDIX A-2: Setup Variables For Serial I/O, Software Version G.4

SETUP VARIABLE
DAS_HOLD_OFF
TPC_ENABLE
RCELL_SET
1
IZS_SET
DYN_ZERO
DYN_SPAN
CONC_PRECISION
17
REM_CAL_DURATION
CLOCK_ADJ
LANGUAGE_SELECT
MAINT_TIMEOUT
CONV_TIME
DWELL_TIME
FILT_SIZE
Table A-1: Setup Variables, Software Version G.4
NUMERIC DEFAULT
UNITS VALUE
Low Access Level Setup Variables (818 password)
Minutes 15
— ON
ºC 50
Warnings:
45–55
ºC 50
Warnings:
45–55
— OFF
— OFF
— 3
Minutes 20
Sec./Day 0
Medium Access Level Setup Variables (929 password)
— ENGL
Hours 2
— 33 MS
Seconds 1
Samples 240,
3
30 ,
12
480

APPENDIX A - Version Specific Software Documentation

VALUE RANGE
0.5–20
OFF, ON
30–70
30–70
OFF, ON
OFF, ON
AUTO,
0,
1,
2,
3,
4
1–120
-60–60
ENGL,
SECD,
EXTN
0.1–100
33 MS,
66 MS,
133 MS,
266 MS,
533 MS,
1 SEC,
2 SEC
0.1–10
1–1000
05036 Rev D
DESCRIPTION
Duration of DAS hold off period.
ON enables temperature and pressure
compensation; OFF disables it.
Reaction cell temperature set point and
warning limits.
IZS temperature set point and warning
limits.
ON enables contact closure dynamic
zero; OFF disables it.
ON enables contact closure dynamic
span; OFF disables it.
Number of digits to display to the right
of the decimal point for concentrations
on the display. Enclose value in double
quotes (") when setting from the RS-
232 interface.
Duration of automatic calibration
initiated from TAI protocol.
Time-of-day clock speed adjustment.
Selects the language to use for the
user interface. Enclose value in double
quotes (") when setting from the RS-
232 interface.
Time until automatically switching out
of software-controlled maintenance
mode.
Conversion time for PMT and UV
detector channels. Enclose value in
double quotes (") when setting from the
RS-232 interface.
Dwell time before taking each sample.
Moving average filter size.
A-11