Table of Contents
Advertisement
5 – Operating Software
The status line shows the communication port settings for the active serial device.
5.3.2.7 Video Overlay Enable
Enabling Video Overlay is covered in
section 5.3.3.5 "Video Overlay Setup" on page 5-25
along with
details of the configuration options available.
5.3.3 Configuration Menu
5.3.3.1 System parameters
See
section 5.2.3 "System Parameters" on page
5-6.
5.3.3.2 Altimeter
The Altimeter option allows you to change the altimeter configuration for specific installations and to
view data transmitted by an altimeter connected directly to the SEP. To edit these settings, select
➥
Configuration
Altimeter.
To view data transmitted by an altimeter connected to an SDC serial communication port, use the
Terminal Window described in sub-section
section 5.3.2.6 "Terminal Window" on page
5-19.
Figure 5-9: Altimeter Configuration
5-20
© Teledyne TSS
DPN 402196 Issue 4.1
Advertisement
Table of Contents
