Analog Inputs (Xin1; Figure 5-7. Diag - Analog Inputs (Option) Configuration Menu - Teledyne T300 Operation Manual

Setup Menu
5.9.3.11. ANALOG INPUTS (XIN1...XIN8) OPTION CONFIGURATION
DIAG
PREV
DIAG AIO
< SET SET>
DIAG AIO
< SET SET>
DIAG AIO XIN1 OFFSET:0.00V
< SET SET> EDIT
DIAG AIO XIN1 UNITS:V
< SET SET> EDIT
DIAG AIO XIN1 DISPLAY:OFF
< SET EDIT
Figure 5-7. DIAG – Analog Inputs (Option) Configuration Menu
136
To configure the analyzer's external analog inputs option, define for each channel:
•
gain (number of units represented by 1 volt)
•
offset (volts)
•
engineering units to be represented in volts (each press of the touchscreen
button scrolls the list of alphanumeric characters from A-Z and 0-9)
•
whether to display the channel in the Test functions
To access and adjust settings for the external Analog Inputs option channels press:
ANALOG I / O CONFIGURATION
NEXT ENTR
AOUTS CALIBRATED: NO
CAL
XIN1:1.00,0.00,V,OFF
EDIT
DIAG AIO
SET>
EXIT
EXIT
EXIT
Teledyne API – Model T300/T300M CO Analyzer
EXIT
Press SET> to scroll to the first
EXIT channel. Continue pressing SET>
to view each of 8 channels.
EXIT
XIN1 GAIN:1.00V/V
EDIT EXIT
DIAG AIO
+ 0
Press to change
Press EDIT at any channel
to to change Gain, Offset,
Units and whether to display
the channel in the Test
functions (OFF/ON).
XIN1 GAIN:1.00V/V
0 1 .0 0 ENTR EXIT
Gain value
Pressing ENTR records the new setting
and returns to the previous menu.
Pressing EXIT ignores the new setting and
returns to the previous menu.
06864B DCN6314