Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION
Important safety messages are provided throughout this manual for the purpose of
avoiding personal injury or instrument damage. Please read these messages carefully.
Each safety message is associated with a safety alert symbol, and are placed throughout
this manual and inside the instrument. The symbols with messages are defined as follows:
Note
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying
message for specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s)
and/or the instrument.
Technician Symbol: All operations marked with this symbol are
to be performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the
central safety grounding point for the instrument.
The T100 Analyzer should only be used for the purpose and in the manner
described in this manual. If you use the T100 in a manner other than that for
which it was intended, unpredictable behavior could ensue with possible
hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es).
Technical Assistance regarding the use and maintenance of the T100 or any other
Teledyne ML product can be obtained by contacting Teledyne ML's Customer Service
Department:
or by accessing various service options on our website at http://www.teledyne-ml.com
CAUTION
GENERAL SAFETY HAZARD
Phone: 800-846-6062
Email: tml_support@teledyne.com
iii
Advertisement
Table of Contents
