Teledyne T100 Instruction Manual page 152

Remote Operation & Advanced Features
5.2.2.11. HOLDOFF FEATURE
Toggle to turn HOLDOFF
ON or OFF
152
The DAS HOLDOFF feature allows to prevent data collection during calibrations and
during the DAS_HOLDOFF period enabled and specified in the VARS (refer to Section
6.8).
To enable or disable the HOLDOFF, follow the instruction shown in Figure 5-11, then
press:
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> key until...
SETUP X.X CAL HOLD OFF:ON
SET> EDIT PRINT
SETUP X.X CAL HOLD OFF:ON
ON
Figure 5-20:
Teledyne ML - T100 UV Fluorescence SO2 Analyzer
ATIMER, 2, 4032, R
DEL EDIT PRNT EXIT
PRINT EXIT
EXIT
ENTR EXIT
DAS – Holdoff Feature
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.